)
)
){kind=logo}
Why automatic lubrication?
Why automatic lubrication?
Unplanned production downtimes can be significantly reduced through preventive maintenance. A factor that should not be underestimated is the correct lubrication of bearings, chains, linear guides and spindles.
A high percentage of rolling bearing damage is due to incorrect lubrication.
The solution:
German lubrication sepcialist Gruetzner offers the perfect solution. Using automatic lubricators such as G-LUBE, the lubrication point is supplied with the correct lubricant in the correct dosage. The sources of error of manual lubrication (over-lubrication, insufficient supply, contamination, mix-up of lubricants) are thus prevented. A continuous, consistent and gentle lubrication is the result, repair costs and production losses are reduced.
Flexibility:
G-LUBE can be functionally checked at any time thanks to the transparent housing. Its three sizes enable a lubricant delivery from 0.16 ml/day up to 8 ml/day. This is set through the selectable emptying times from 1 month to 12 months, depending on the requirements.
A very wide range of accessories for installation enables a large selection of applications.
The right lubricant:
G-LUBE is provided with many standard lubricants, but can also be self-filled. Additionally, Gruetzner offers special fillings even for small quantities.
Work safety:
With a pressure build-up of up to 5 bar / 73 psi, G-LUBE does not have to be mounted directly on the lubrication point. Supply lines are also possible in areas that the user can comfortably reach. G-LUBE thus also contributes to occupational safety and reduces a large amount of time compared to manual lubrication. No tools are required for activation.
Proven technology:
The function of the G-LUBE is based on the proven technology of an electrochemical reaction, which generates inert nitrogen (N2) through the systematic use of an electrolyte. This type of pressure build-up means that G-LUBE is more temperature-independent than many conventional gas-powered lubricators: Temperature ranges from -20 °C (-4 °F) up to 55 °C (131 °F) are covered by G-LUBE. Thanks to its very robust housing, it can be used in in harsh environments as well as sensitive food areas and even EX areas.
Environmental protection:
Using the G-LUBE reduces lubricant and energy consumption for drives.
Further information can be found at www.G-LUBE.com